Behringer Ultraroc GX110 User Manual download pdf (Page 11)

ULTRAROC GX110

2. WIRING EXAMPLES

2.1 Standard setup consisting of guitar, footswitch and external effects device

To use your ULTRAROC for rehearsals or on stage, please wire up the unit as shown in fig. 2.1. Of course, you

can also use a wah-wah or other pedal effect instead of the external 19" effects unit, or simply work with the

internal effects without having to use the insert path at all. Connecting the headphones will mute the built-in

speaker.

When you wish to use a guitar tuner, please connect it to the INSERT SEND of your ULTRAROC. If there is no

further effects device connected, you can leave the INSERT RETURN as it is. However, to use an external

effects device, place the tuner before the effects in the signal chain, so that it works on unprocessed signals

only.

Fig. 2.1: Standard setup

2.2 Expanded setup with MIDI foot controller, playback source and mixing console

To use your ULTRAROC for advanced applications, please consider the following suggestions. Of course, the

expanded configuration suggested in fig. 2.2. builds on the standard setup described in chapter 2.1.

Use the MIDI foot controller to change presets and/or channels, set volume and wah, etc. The line out signal

can be fed into a P.A. or recording console, and the AUX input can be used to play back e.g. cassette recorder

signals through the GX110.

2. WIRING EXAMPLES

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

No comments

Behringer Ultraroc GX110 User Manual Page 11