7
EUROPOWER PMP518M
4. INSTALLATION
2.4 Rear panel
The mains connection is on a standard IEC receptacle. An
appropriate power cord is supplied with the unit.
FUSE HOLDER. Before connecting the unit to the mains,
ensure that the voltage setting matches your local voltage.
Blown fuses should only be replaced by fuses of the same
type and rating. Please also read the information given in
chapter 6 SPECIFICATIONS.
The three PARALLEL SPEAKER OUTPUTs provide the
mono main signal on a Neutrik Speakon-compatible
connector (pins 1+/1- and 2+/2-) and on two
1/4" TS connectors.
+ The impedance of the loudspeaker connected must
not fall below 4 W.
+ Information on how to properly connect your
speaker with regard to polarity can be found on the
rear of the mixer (PINOUTs).
This is the cooling fan of the unit.
SERIAL NUMBER.
3. DIGITAL EFFECTS PROCESSOR
100 FIRST-CLASS EFFECTS
The PMP518M features a built-in digital effects processor. This
effects processor offers a large number of standard effects
such as Hall, Chorus, Flanger, Delay and various combination
effects. Using the FX control, you can feed signals into the
effects processor. The integrated effects module has the
advantage of requiring no wiring. This way, the danger of creating
ground loops or uneven signal levels is eliminated at the outset,
completely simplifying the handling.
Presets 00 - 09: Hall
Presets 10 - 19: Room
Presets 20 - 29: Plate
Presets 30 - 39: Gated/Reverse
Presets 40 - 49: Early Reflections
Presets 50 - 59: Delay
Presets 60 - 69: Chorus
Presets 70 - 79: Phase/Pitch
Presets 80 - 89: Multi 1
Presets 90 - 99: Multi 2
4. INSTALLATION
4.1 Mains connection
Blown fuses must be replaced by fuses of the same type and
rating.
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all of the international
safety certification requirements.
+ Please make sure that all units have a proper
ground connection. For your own safety, never
remove or disable the ground conductor from the
unit or of the AC power cord.
4.2 Audio connections
The inputs and outputs of the BEHRINGER EUROPOWER are
unbalanced 1/4" TS connectors except for the balanced mono
line inputs and the balanced XLR inputs. Of course, all inputs and
outputs work with both balanced and unbalanced connectors.
The Tape Ins and Outs are on RCA connectors.
+ Please ensure that only qualified personnel install
and operate the power mixer. During installation
and operation, the user must have sufficient
electrical contact to earth. Electrostatic charges
might affect the operation of the unit.
Fig. 4.1: 1/4" TS connector
Fig. 2.2: Rear panel control elements and connectors
(12 pages)
(18 pages)
(10 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals