9
EUROPOWER PMH518M
6. SPECIFICATIONS
The following illustration shows a live application with the
PMH518M as monitor mixer and a BEHRINGER EURODESK
SL2442FX-PRO that provides the FOH main mix signal. The
PMH518M receives the Aux Send signal of the EURODESK that
is used for the monitor mix on stage.
Fig. 5.2: Setup with PMH518M as monitor mixer
6. SPECIFICATIONS
MICROPHONE INPUTS
Type XLR, electronically balanced
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -122 dB / -125 dB A-weighted
@ 50 Ω source resistance -122 dB / -125 dB A-weighted
@ 150 Ω source resistance -121 dB / -124 dB A-weighted
Frequency response < 10 Hz - 100 kHz (-1 dB),
< 10 Hz - 200 kHz (-3 dB)
Gain +33 dB, +8 dB with pad
Max. input level +12 dBu @ 10 dB gain
Impedance approx. 2.2 kΩ balanced,
1.1 kΩ unbalanced
Signal-to-noise ratio 110 dB / 114 dB A-weighted
(-11 dBu in @ +33 dB gain)
Distortion (THD+N) 0.001% / 0.0008% A-weighted
MONO LINE INPUTS
Type 1/4" TRS connector, balanced
Impedance approx. 80 kΩ balanced,
40 kΩ unbalanced
Max. input level +30 dBu
EQ
Low 80 Hz / ±15 dB
High 12 kHz / ±15 dB
MAIN MIX SYSTEM DATA
Noise
Main mix @ -oo,
Channel fader -oo -106 dB / -110 dB A-weighted
Main mix @ 0 dB,
Channel fader -oo -87 dB / -90 dB A-weighted
Main Mix @ 0 dB,
Channel fader @ 0 dB -80 dB / -82 dB A-weighted
LOUDSPEAKER OUTPUTS
Type Neutrik
®
Speakon
®
-compatible,
1/4" TS connectors
Load impedance 4 - 16 Ω
DSP
Converter 24-bit Sigma-Delta,
Sampling rate 40 kHz
DISPLAY
Type 2-digit, 7-segment LED
AMPLIFIER
Output power @ 4 Ω 1 x 180 W
Output power @ 8 Ω 1 x 100 W
POWER SUPPLY
Mains voltages U.S./Canada
120 V~, 60 Hz
China/Korea
220 V~, 50 Hz
Europe/U.K./Australia
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
General export model
120/230 V~, 50 - 60 Hz
Power consumption max. 290 W
Fuse 100 - 120 V~: T 6.3 A H 250 V
220 - 240 V~: T 3.15 A H 250 V
Mains connection Standard IEC receptacle
PHYSICAL/WEIGHT
Dimensions (H x W x D) approx. 4 3/5" (117 mm)
x 18 1/2" (470 mm)
x 8 9/8" (225 mm)
Weight (net) approx. 15.88 lbs (7.2 kg)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result
of these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may differ from those listed or illustrated.
Comments to this Manuals