Behringer PMH5000 User Manual Page 1

Version 1.2 November 2004User’s ManualENGLISHEUROPOWER PMH1000/PMH3000/PMH5000

10EUROPOWER PMH1000/PMH3000/PMH50005. WIRING EXAMPLESOUTPUT BOUTPUT A+1+1-1-18 Ω4 Ω8 Ω4 ΩBRIDGE16 Ω 8 Ω+1+2Fig. 4.6: SPEAKON® pin assignment5. WIRING

11EUROPOWER PMH1000/PMH3000/PMH5000Fig. 5.3: Dual mono operation For a dual mono operation, the AMP MODE switch mustbe set to its center position (M

12EUROPOWER PMH1000/PMH3000/PMH50005. WIRING EXAMPLESFig. 5.5: Expanded set-upThis application is an expanded set-up based on the standard set-up as s

13EUROPOWER PMH1000/PMH3000/PMH50006. SPECIFICATIONS6. SPECIFICATIONSBEHRINGER is constantly striving to maintain the highest professional standards.

14EUROPOWER PMH1000/PMH3000/PMH50007. WARRANTY7. WARRANTY§ 1 WARRANTY CARD/ONLINE REGISTRATIONTo be protected by the extended warranty, the buyer must

2EUROPOWER PMH1000/PMH3000/PMH5000IMPORTANT SAFETY INSTRUCTIONSThis symbol, wherever it appears, alerts you to thepresence of uninsulated dangerous vo

3EUROPOWER PMH1000/PMH3000/PMH5000FOREWORDDear Customer,Welcome to the team ofEUROPOWER usersand thank you very muchfor expressing your confi-dence in

4EUROPOWER PMH1000/PMH3000/PMH50001. INTRODUCTIONCongratulations! With the PMH1000/PMH3000/PMH5000 youhave acquired a state-of-the-art power mixer tha

5EUROPOWER PMH1000/PMH3000/PMH50002. CONTROL ELEMENTSThe FX control determines the signal level sent from eachchannel to the built-in effects processo

6EUROPOWER PMH1000/PMH3000/PMH50002. CONTROL ELEMENTS In BRIDGE mode, always connect only oneloudspeaker with an impedance of at least 8 ΩΩΩΩΩ tothe

7EUROPOWER PMH1000/PMH3000/PMH50003. DIGITAL EFFECTS PROCESSORPMH1000: MON SEND fader.PMH3000/PMH5000: MON1/2 fader.These faders are used to set the m

8EUROPOWER PMH1000/PMH3000/PMH50004. INSTALLATIONCONCERT: Select between a small theater and a large hall.Although this program is similar to studio (

9EUROPOWER PMH1000/PMH3000/PMH50004. INSTALLATIONFig. 4.1: 1/4" TS connectorFig. 4.2: 1/4" TRS connectorFig. 4.3: XLR connectorsFig. 4.4: 1/