Behringer X32 PRODUCER-TP Quick Start Guide download pdf (Page 7)

12 13X32 PRODUCER DIGITAL MIXER Quick Start Guide

X32 PRODUCER DIGITAL MIXER Getting Started

(EN) Getting Started

Delay

0.3

Set DelayAssign

0.3

0.10

Delay

Select Select Select Select

Ch01

01:

home aux out

analog out

p16 out

card out aes50-a aes50-b

Analog Output

CategoryCurrent Setting

Edit Output Assignment

Processed Output Signal Tap

0:00 - 0:00

A: S16 A: 48K

B: - C: X-USB

: 37

14:09

Output 01

Output 02

Output 03

Output 04

Output 05

Output 06

Output 07

Output 08

*Output 09

*Output 10

*Output 11

*Output 12

*Output 13

*Output 14

MixBus

OFF

Main (LRC)

Mix Bus

Matrix

Direct Out

Monitor

OFF

Main L

Main R

Main C/M

Main Bus 01

Main Bus 02

Main Bus 03

Main Bus 04

Main Bus 05

Main Bus 06

Main Bus 07

Main Bus 08

Main Bus 09

Pre EQ

Post EQ

Pre Fader

Post Fader

Output Signals can be freely assigned from

anyinternal signal to any of the following outputs:

• 8 analog local XLR outputs (with adjustable

digital delay for time-alignment of speakers)

• 8 virtual outputs (marked with *) for routing over

AES50 or card outputs

• 6 auxiliary sends on ¼" TRS outputs

• 16 channels personal monitoring using the

console’s P-16 Bus output connector

Any and all of the above signals can also be mirrored

in blocks of 8 signals on either one of

• 48x channels on AES50 port A

• 48x channels on AES50 port B

• 32x channels on USB interface card

Link Lo Cut

Ch01

01:

0:00 - 0:00

A: S16 A: 48K

B: - C: X-USB

: 37

14:11

-6

-12

-18

-24

-30

-36

-42

-48

-54

clip

home gate dyn eq sends main

cong

Gain

48V

Pre PostIns

Delay

+0.00

Link

Lo Cut

Input

Select

Source

PRE

Insert

Ins Pos

InsF

Connect

Insert

0.3

Delay

+0.0

2.0

Reverse

0.3

0.10

0.03

Source

OFF

Input 01

Input 02

Input 03

Input 04

Input 05

Input 06

Insert

OFF

InsFX 1L

InsFX 1R

InsFX 2L

InsFX 2R

InsFX 3L

Insert Position

Inputs

-6

-12

-18

-24

-30

-36

-42

-48

-54

clip

Link

Gain

00.00

Send Pos. Insert Pos. Insert

Link Bus Sends

Insert

Connect

Pre

LeOnde.mp3

29 November 2010 Scene01

13:44:43 MyProj.prj

00.05.00 00.00.00

home gate dyn eq sends main

cong

Bus Conguration Bus Insert Position

Insert

Ins 02

FX 01

FX 02

Ins 01

...

Ins 03

Ins 04

All Channel Sends

Pre Conguration

Inputs

Sub Grou

...

Post Fader

Pre EQ

Pre Fader

Insert PostPre

∑

Channel Sends

The conguration of Mix Bus Channels 1-16 can

be pre-set (in the Setup/Global page) or can also

be congured on an individual, per-channel basis.

Thebus processing includes (in this order):

• Insert point (swappable between post-EQ and

pre-EQ operation)

• 6-band fully parametric EQ

• Compressor/expander (swappable between

post-EQ and pre-EQ operation)

• Bus sends to 6 matrices

• Main LR panning

• Mono/Center level

Main Bus Channels LR/C are always available and

independent from Mix Buses. The processing steps

for this signal path include (in this order):

• Insert point (swappable between post-EQ and

pre-EQ operation)

• 6-band fully parametric EQ

• Compressor/expander (swappable between

post-EQ and pre-EQ operation)

• Bus sends to 6 matrices

Matrix Channels 1-6 are fed exclusively by

MAINLRC and Mix Bus 1-16 signals. The processing

steps include (in this order):

• Insert point (swappable between post-EQ and

pre-EQ operation)

• 6-band fully parametric EQ

• Compressor/expander (swappable between

post-EQ and pre-EQ operation)

Eects Processing 1-8

The X32 PRODUCER console contains eight

true-stereo internal eects engines.

• FX 1-4 can be congured as side chain or insert

eects, while FX 5-8 can only be used in insert

points of channels or buses

• The returns of side chain FX 1-4 can always be

controlled using the 6th bank (layer) of the input

channels - Eects Returns. Note that the return

signals of FX 1-4 have separate faders for left

and right

• The FX Home screen allows selection of the

FX 1-4 input sources and selecting the eects

type/algorithm for each of the 8 FX slots of the

virtual rack

• The subsequent tabs FX 1-FX 8 of the FX screen

allow editing all parameters of the chosen

eects processor

Input Channels 1-16 are pre-congured to use

the local input signals 1-16, but can be patched to

use any other available signal on the audio engine

as well, including mix bus/sub group outputs.

Changesof the Channel Source can be made on the

Preamp Congpage.

Input Channels 17-32 are pre-congured to AES50

A inputs 1-16, so that connecting an S16 stage box to

port A will automatically feed thechannels.

Aux Return Channels 1-8 are pre-congured

to use the 6 aux input signals, and the two USB

playback outputs, but can be patched to use any

other available signal of the console as well.

FX Return Channels 1L-4R control the 4 stereo

output signals of side-chain FX 1-4.

iPad App for X32 PRODUCER

Many functions of the X32 PRODUCER console

can be remotely controlled by a dedicated iPad

app. Details about the app’s download, setup and

operation are included in a separate user manual

available for download from the X32 PRODUCER

product page.

The app’s User Interface is optimized for the

touchscreen nature of the iPad device and provides

many useful remote features of the console.

Using the app, you can perform functions such

as adjusting monitor mixes from the stage while

interacting with musicians, or adjusting the front-

of-house mix from the audience, while hearing the

mix exactly as the audience does.

Windows-based application and Linux/

OS X application for X32 PRODUCER

Also oered is a separate remote editor running

onhost computers that will allow for complete

editing control of the X32 PRODUCER via Ethernet.

Details of the remote editor’s download, setup and

operation are included in a separate user manual

available for download from the X32 PRODUCER

product page. Check out behringer.com for

more information.

Tip: The X32 PRODUCER remote communication is

OSC-based (open sound control) and we will share

the protocol on our website, allowing developers

to design their own control software. Stay tuned to

behringer.com for details on the OSC protocol.

X-USB card

The X-USB card allows transmission of up to

32channels to and from a connected computer.

Pleasedownload the X-USB drivers and Quick Start

Guide from behringer.com before connecting the

mixer to your computer.

1 2 3 4 5 6 7 8 9 10 11 12 ... 30 31

Comments to this Manuals

No comments

Behringer X32 PRODUCER-TP Quick Start Guide Page 7

Comments to this Manuals

Related products and manuals for DJ controllers Behringer X32 PRODUCER-TP