Behringer Eurodesk SL2442FX-Pro User Manual download pdf (Page 12)

EURODESK SL3242FX-PRO/SL2442FX-PRO

Wiring examples12

Wiring examples4.

Studio set-up4.1

The following wiring example shows a studio set-up for 4-track-recording: the drums are mixed down to two su/jointfilesconvert/335959/bgroups and then

routed via the su/jointfilesconvert/335959/bgroup outputs to two tracks of the multi-track recorder. The remaining two su/jointfilesconvert/335959/bgroups are used to record the guitar,

keyboard (stereo channel) and two vocal signals on the remaining two tracks. The four return paths from the recorder are connected

to four separate mono input channels on the EURODESK. The built-in compressor is used only for the bass, which is why this input

channel is separate from all buses (SUB and MAIN switch not pressed). The bass signal is directly routed from the built-in effects

processor to the respective su/jointfilesconvert/335959/bgroups (FX TO MAIN control). The MAIN/SUB switch in the FX1 section is pressed, but NOT the SUB

1/2 SUB 3/4 button.

Wiring the console for studio operationFig. 4.1:

Please make sure that none of the su/jointfilesconvert/335959/bgroup routing switches (1-2 and 3-4) is pressed in the channels connected to +

the recorder returns. Otherwise, a feedback loop will be created as soon as you start recording. Only press the MAIN

switch on these input channels, so that the tape return signals are routed to the main outs and Phones/CTRL room

outputs of the console.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Behringer Eurodesk SL2442FX-Pro User Manual Page 12

Comments to this Manuals

Related products and manuals for Musical Instruments Behringer Eurodesk SL2442FX-Pro