Behringer SU9920 User Manual download pdf (Page 8)

8 SONIC ULTRAMIZER SU9920 User Manual

Alternatively, you can use professional XLR cables with an XLR socket on one side

and an XLR plug on the other side. This cable connection is the most reliable both

electrically and mechanically.

output

For unbalanced use, pin 1 and pin 3

have to be bridged

1 = ground/shield

2 = hot (+ve)

3 = cold (-ve)

input

Balanced use with XLR connectors

Fig. 4.3: Balanced XLR plug

4.2.2 Connection with insert cables

Please use standard insert cables equipped with ¼" connectors to connect

the SONIC ULTRAMIZER to the insert path of a mixing console. These Y cables

have two ¼" TS connectors at one end, and one ¼" TRS connector at the

other. Connectthe plug marked “Send” to the INPUT L jack on the eects unit.

Connectthe “Return” plug to the OUTPUT L jack on the device. Connect the TRS

connector to the insert jack of the channel strip on the mixing console. Use two

insert cables for stereo sub-groups and main-mix inserts. The second cable must

be connected to the INPUT/OUTPUT R jacks of the SU9920.

strain relief clamp

sleeve

tip

sleeve

ground/shield

tip

signal

Return

(out)

strain relief clamp

sleeve

tip

sleeve

ground/shield

tip

signal

Send

(in)

strain relief clamp

sleeve

ring

tip

sleeve

ground/shield

ring

return (in)

tip

send (out)

Fig. 4.4: Insert cable with one ¼" TRS (tip-ring-sleeve) jack plug on one end and two ¼" TS

(tip-sleevel) jack plugs on the other end.

5. Specications

Inputs

Connections XLR sockets and ¼" stereo jacks

Type Balanced

Input impedance 20 kΩ balanced, 10 kΩ unbalanced

Nominal input level +4 dBu

Maximum input level +22 dBu

Outputs

Connections XLR sockets and ¼" stereo jacks

Type Servo-balanced

Output impedance 60 Ω balanced, 60 Ω unbalanced

Maximum output level +22 dBu

Enhancer Section

Type 3-band phase delay and dynamic lter

PROCESS control max. 12 dBu @ 5 kHz

LOW CONTOUR control max. 12 dBu @ 50 kHz

System Data

Frequency response 25 Hz to 50 kHz, +/-3 dB

Signal-to-noise ratio >95 dB, unweighted, 20 Hz to 20 kHz

Distortion (THD + N) 0.05% typ. @ +4 dBu, 1 kHz (IN/OUT)

Crosstalk >75 dB

Power Supply

Mains Voltage

USA/Canada 120 VAC, 60 Hz

China/Korea 220 VAC, 50/60 Hz

Europe/UK/Australia 230 VAC, 50 Hz

Japan 100 VAC, 50-60 Hz

Export model 120/230 VAC, 50-60 Hz

Power consumption approx. 12 W

Fuse 100-120 VAC: T 250 mA, H 250 V

220-240 VAC: T 125 mA, H 250 V

Dimensions/Weight

Dimensions (H x W x D) approx. 8.5 x 1.8 x 19''

approx. 217 x 44.5 x 483 mm

Weight approx. 4.84 lbs / 2.20 kg

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,

modifications may be made from time to time to existing products without prior notice. Specifications and

appearance may differ from those listed or illustrated.

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Behringer SU9920 User Manual Page 8

Comments to this Manuals

Related products and manuals for Processors Behringer SU9920