Behringer Europort MPA40BT-Pro Quick Start Guide download pdf (Page 9)

16 17EUROPORT MPA40BT/MPA40BT-PRO Quick Start Guide

(EN) Step 3: Getting

started

EUROPORT MPA40BT/MPA40BT-PRO Getting started

If you are using BEHRINGER wireless

microphones, plug the wireless dongle

into the WIRELESS SYSTEM USB input.

The WIRELESS SYSTEM LEDs will light up

when the wireless microphones become active.

To pair a Bluetooth device with

the MPA40BT/MPA40BT-PRO,

follow these steps:

• Press and hold the BT/AUX PAIRING BUTTON

until the LED ashes quickly.

• Open Bluetooth in your mobile phone,

MP3 player or other Bluetooth equipment

to pair and connect.

• In your Bluetooth device, enter the PIN code: 0000

(Bluetooth version 2.0 and above will not require

a PIN code).

• When the LED lights solid, you can begin playing

music from your Bluetooth device.

While playing music from your

Bluetooth device, turn the BT/AUX LEVEL

knob to about the 50% position.

Slowly rotate the MAIN LEVEL knob

clockwise until you achieve a comfortable

listening level.

While speaking into each microphone,

slowly rotate the MIC 1 and/or MIC 2 LEVEL

knobs clockwise until you nd a clean,

clear sound. If a microphone signal sounds distorted,

rotate the LEVEL knob slowly counter-clockwise

until the sound cleans up.

If you have an instrument plugged into

the MIC 1 or MIC 2 channels, play the

instrument and slowly rotate that

channel's LEVEL knob clockwise until you nd an

acceptable level.

If you have an instrument or other external

sound source plugged into the iPOD/AUX

RCA jacks, adjust the volume on the

instrument or sound source.

Balance all of the audio channels against

each other by adjusting each channel's

respective LEVEL knob until you nd an

acceptable mix.

Adjust the BASS and TREBLE controls if

the overall sound needs more low or

high frequencies.

Make nal adjustments to the

MAIN LEVEL knob.

Guitar

Set up the MPA40BT/MPA40BT-PRO in

your chosen listening location.

Connect the MPA40BT/MPA40BT-PRO to

a power outlet by using the included IEC

power cable.

Turn all LEVEL knobs and the

MAIN LEVEL knob down to the full

counter-clockwise setting.

Connect all analog microphone,

instrument, and/or RCA cables to their

respective input jacks.

Power up the MPA40BT/MPA40BT-PRO

by pressing the POWER switch to the

“on” position.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Comments to this Manuals

No comments

Behringer Europort MPA40BT-Pro Quick Start Guide Page 9

Comments to this Manuals

Related products and manuals for Unknown Behringer Europort MPA40BT-Pro