Behringer BTR2000 User Manual

Users manualVersion 1.0 April 2005DEUTSCHRACKTUNER BTR2000

10RACKTUNER BTR2000Bass (BAS)This mode is especially well suited for a 6-string bass. (B - E - A - D - G - C)Baritone (brt)This setup helps you

11RACKTUNER BTR2000DEUTSCH4.3.1 Manual calibrationThe pitch of the standard A is set to a particular frequency using the BTR2000 co

12RACKTUNER BTR20001. Briefly press the TRANSPOSE/REF button. The TRANSP light flashes and the display shows thetransposition currently set (0, if

13RACKTUNER BTR2000DEUTSCH5. METRONOMEThe integrated metronome in the BTR2000 has a range of 30 beats per minute (BPM) to 240 BPM.The

14RACKTUNER BTR2000Acoustic indicatorThe selected tempo is also output at the SOUND or MAIN connector.+ If your instrument is plugged into

15RACKTUNER BTR2000DEUTSCH7. APPLICATION EXAMPLESThe following sample configurations should give you an idea how the BTR2000 can be inte

16RACKTUNER BTR20008. INSTALLATION8.1 Rack installationThe BTR2000 requires one height unit (1 HU) for installation in a 19" rack.

17RACKTUNER BTR2000DEUTSCH9. SPECIFICATIONSAUDIO CONNECTORSINPUT 1 1/4" TS connector on the front and backInput impedance 1 MΩ, relay

18RACKTUNER BTR2000SHORT INSTRUCTIONSSHORT INSTRUCTIONS

2RACKTUNER BTR2000CAUTION: To reduce the risk of electric shock,do not remove the top cover (or therear section). No user serviceableparts insi

3RACKTUNER BTR2000DEUTSCHTABLE OF CONTENTS1. INTRODUCTION ...

4RACKTUNER BTR20001. INTRODUCTIONThank you for the confidence you have placed in us with your purchase of the BTR2000. You haveacquir

5RACKTUNER BTR2000DEUTSCHShould your BEHRINGER dealer not be located in your vicinity, you may directly contact one of oursubsidiaries

6RACKTUNER BTR2000TRANSPOSE/REF [TAP] button.Tuner mode: A short tap on this button lets you use the wheel for transposition (chapter

7RACKTUNER BTR2000DEUTSCH2.2 RearFig. 2.3: Serial number and sockets on the rear of the BTR2000SERIAL NUMBERMUTEYou can connect a single fo

8RACKTUNER BTR2000+ To enable reference tones and the metronome, click to be output from the MAIN connector,INPUT 2 must be selected and there must be

9RACKTUNER BTR2000DEUTSCH4.1.2 Tuning with the built-in microphone+ To be able to work with the built-in microphone, there must be no cable plugged in