Behringer UB2222FX-PRO User Manual download pdf (Page 5)

EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO

1.2 The users manual

The users manual is designed to give you both an overview of

the controls, as well as detailed information on how to use them.

In order to help you understand the links between the controls,

we have arranged them in groups according to their function. If

you need to know more about specific issues, please visit our

website at http://www.behringer.com, where youll find

explanations of e.g. effects and dynamics applications.

+ The block diagram supplied with the mixing console

gives you an overview of the connections between

the inputs and outputs, as well as the associated

switches and controls.

For the moment, just try and trace the signal path from the

microphone input to the aux send 1 connector. Dont be put off

by the huge range of possibilities; its easier than you think! If you

look at the overview of the controls at the same time, youll be

able to quickly familiarize yourself with your mixing console and

youll soon be making the most of all its many possibilities.

1.3 Before you get started

1.3.1 Shipment

Your mixing console was carefully packed in the factory to

guarantee safe transport. Nevertheless, we recommend that

you carefully examine the packaging and its contents for any

signs of physical damage, which may have occurred during

transit.

+ If the unit is damaged, please do NOT return it to us,

but notify your dealer and the shipping company

immediately, otherwise claims for damage or

replacement may not be granted.

1.3.2 Initial operation

Be sure that there is enough space around the unit for cooling

purposes and to avoid over-heating please do not place your

mixing console on high-temperature devices such as radiators

or power amps. The console is connected to the mains via the

supplied cable. The console meets the required safety standards.

Blown fuses must only be replaced by fuses of the same type

and rating.

+ Please note that all units must be properly

grounded. For your own safety, you should never

remove any ground connectors from electrical

devices or power cables, or render them in-

operative.

+ Please ensure that only qualified people install and

operate the mixing console. During installation and

operation, the user must have sufficient electrical

contact to earth, otherwise electrostatic discharges

might affect the operation of the unit.

1.3.3 Warranty

Please take time to fill out and return the warranty card within

14 days after the date of purchase, so as to be entitled to benefit

from our extended warranty. Alternatively, you can use our

online registration option available on the world wide web

(www.behringer.com). You will find the serial number on the

rear of your mixing console.

2. CONTROL ELEMENTS AND

CONNECTORS

This chapter describes the various control elements of your

mixing console. All controls, switches and connectors will be

discussed in detail.

2.1 Mono channels

2.1.1 Microphone and line inputs

Fig. 2.1: Connectors and controls of mic/line inputs

MIC

Each mono input channel offers a balanced microphone input

via XLR as well as switchable phantom power (+48 volt) for

powering condenser microphones.

+ Please mute your monitor system before you

switch on phantom power. Otherwise potentially

damaging thumps will be sent to your speakers.

Please also note the instructions in chapter 5.5

Voltage supply, phantom power and fuse.

LINE IN

Each mono input also has a balanced line input on a 1/4" jack.

You can also connect unbalanced devices using mono jacks to

these inputs.

+ Please remember that you can use either the

microphone input or the line input of a channel, but

not both at the same time!

INSERT

Insert points enable the processing of a signal with dynamic

processors or equalizers. They are sourced pre-fader, pre-EQ

and pre-aux send. Detailed information on using insert points

can be found in chapter 5.3.

+ Unlike the UB2442FX-PRO, the UB1622FX-PRO,

UB1832FX-PRO and UB2222FX-PRO have their insert

points located on the rear of the console.

GAIN

Use the GAIN control to adjust the input gain. This control

should always be turned right down whenever you connect or

disconnect a source on one of the inputs. The GAIN control

governs both the microphone and the LINE input level. The MIC

graduation indicates the gain range (10 to 60 dB), while LINE

shows the input level (+10 to -40 dBu), ensuring optimum level

matching.

2. CONTROL ELEMENTS AND CONNECTORS

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Behringer UB2222FX-PRO User Manual Page 5

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Behringer UB2222FX-PRO