Behringer UB2222FX-PRO User Manual download pdf (Page 8)

EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO

AUX SEND 1, 2 and 4

The AUX SEND 1 control governs the master send level of the

mix created by the individual channel AUX 1 sends.

Likewise, the AUX SEND 2 contol is the master control for the

aux 2 bus, and AUX SEND 4 controls the AUX 4 bus.

AUX SEND 3 (FX)

The FX control determines the signal level for effects

processing, i.e. regulates the level to an external (or the inter-

nal) effects device.

UB1622FX-PRO and UB1832FX-PRO: On these consoles, this

function is performed by the AUX SEND 2 control (FX).

SOLO

You can use the SOLO switch to separately monitor the aux

sends via the CONTROL ROOM/PHONES outputs and check

these with the level meters.

+ If you want to monitor the signal of just one AUX

bus, none of the other SOLO SWITCHES should be

pressed and the MODE switch should be in the SOLO

position (not depressed).

2.3.2 Aux send jacks

Fig. 2.8: Aux send jacks

AUX SEND jacks

The AUX SEND jack should be used when hooking up a monitor

power amp or active monitor speaker system. The relevant aux

path should be set pre-fader.

+ On the UB2222FX-PRO, aux send 1 is hard wired

as pre-fader and hence called MON. Model

UB1832FX-PRO has a dedicated monitor output

(MON OUT jack), cf. chapter 2.3.4.

As already mentioned, the aux sends in the channelsif set

post-fadercan be used to connect to external effects devices.

AUX SEND (FX)

The AUX SEND (FX) jack carries the master aux mix (from the

channels FX controls). You can connect this to an external

effects device to process the FX bus. The processed signal can

then be brought from the effects device back into the STEREO

AUX RETURN jacks.

2.3.3 Stereo aux return connectors

Fig. 2.9: The aux return connectors

+ On the UB2222FX-PRO, UB1832FX-PRO and

UB1622FX-PRO the STEREO AUX RETURN jacks

are located on the front panel of the unit.

STEREO AUX RETURN

The STEREO AUX RETURN 1 jacks generally serve as the

return for the effects mix (created using the post-fader aux

sends) by connecting the output of an external effects device. If

only the left jack is connected, the AUX RETURN is automatically

switched to mono.

+ You can also use these jacks as additional line

inputs.

All stereo aux returns are balanced, but can of course also be

used with unbalanced connectors. If you use an aux send for

monitoring, the associated unused stereo aux returns are

available for other line level signals (e.g. keyboards).

+ A signal fed into the stereo return jacks can be

output via an aux send jack. More information on

this can be found in chapter 2.3.5 STEREO AUX

RETURN 1/2 (TO AUX SEND).

STEREO AUX RETURN FX

The STEREO AUX RETURN FX jacks accept the effects mix

return (created using the channel FX sends). If these jacks are

already in use as additional inputs, you can route the effects

signal back into the console via a different channel. The advantage

of this is that you can now use that channels EQ on the effects

return signal.

+ In this instance, the FX control of the channel being

used as an effects return should be turned fully

counterclockwise, otherwise feedback problems

could occur!

+ If you wish to use the internal effects processor,

do not plug any connectors into the STEREO AUX

RETURN FX jacks, unless you want to tap the

processed signal via the FX OUT (UB2222FX-PRO and

UB2442FX-PRO only).

2.3.4 The monitor section of the UB1832FX-PRO

One of the ways that the UB1832FX-PRO differs from the

other models of this series is that it has a separate monitor

output.

Fig. 2.10: Monitor output of the UB1832FX-PRO

The first aux send (MON) on this console is used to set up the

monitor mix from the channels and route it to the MONITOR

fader.

Fig. 2.11: Monitor fader of the UB1832FX-PRO

2. CONTROL ELEMENTS AND CONNECTORS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Behringer UB2222FX-PRO User Manual Page 8

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Behringer UB2222FX-PRO